2012 Honda CR-V Coolant in Burlington, MA

A puddle under the front of the vehicle can also indicate a leak rather than coolant simply needing replacement. The cooling system should be checked cold because it is under pressure and hot after running. A pressure test helps determine whether the vehicle needs coolant service, leak repair, or both.

• Temperature gauge running higher than usual
• Sweet smell or a puddle under the front of the vehicle
• Rusty, cloudy, or low coolant in the reservoir

The replacement coolant is the type and concentration the manufacturer specifies for this vehicle. Pressure testing helps identify leaks and separates a coolant service that is due from a repair need. The system is checked cold, since a cooling system remains pressurized and hot after operation.

• Drain and refill with manufacturer-specified coolant
• Cooling-system pressure test for leaks
• Inspection of hoses, cap, radiator, and water pump area

Coolant additives deplete over time even when the fluid still appears to cool the engine normally. The maintenance schedule should guide replacement timing rather than appearance alone. If the temperature gauge changes, the reservoir level falls, or a smell or puddle appears, an inspection is appropriate sooner.

• Follow the manufacturer's maintenance schedule
• Have coolant condition tested during service visits
• Book an inspection for temperature, odor, or level changes

Colour is not a reliable guide to what is in the bottle, so selecting fluid by appearance can create compatibility concerns. The correct coolant type and concentration should be established from the vehicle's manufacturer specifications. A service visit can also check the existing coolant and cooling-system condition.

• Use the manufacturer-specified coolant type
• Do not treat coolant colours as a compatibility guide
• Have the system checked if the fluid type is uncertain

A level that keeps dropping indicates a leak rather than normal consumption and should lead to an inspection. Never open the cooling system while it is hot or pressurized; checking it is done cold. Pressure testing can help identify whether the system is losing coolant and where repair may be needed.

• Adding coolant restores level only
• A repeatedly low level can indicate a leak
• Check the system cold, never immediately after driving

The dealership is at 33 Cambridge Street, Rte 3A Exit 51A Off Rte 128, Burlington, MA 01803. Booking the coolant service gets the coolant's condition and the system's pressure tested, helping separate a service that is due from a leak that needs repair. You can also review available service specials before your visit.

• Book online through the service scheduler
• Call 781-650-4209 for assistance
• Visit the Burlington service center for testing and inspection